stuck elevator Archives - SMOU : شركة سمو لتجارة المصاعد

What to do if you are in a stuck elevator

September 7, 2023

stuck elevator are considered one of the most important ways that provide comfort to people and have become widely used, whether in residential units or government and private institutions and public institutions, so a question arises what to do if you are in a stuck elevator

and this is considered one of the biggest and most common problems that occur because of elevators, and through this article We can come up with the best tactics to take when someone gets stuck in an elevator.

What to do if you are in a stuck elevator

The answer to the question of what to do if you are in a stuck elevator is one of the most important answers that many are interested in getting to know, so that they can get rid of that problem when exposed to it. A stuck elevator is a scary thing, especially if the person suffers from claustrophobia

Therefore, it is always advised to know the methods that can be followed when exposed to that accident, and there are some methods that you must avoid when this happens, and they can be identified through the following:

Things to follow when the elevator gets stuck

There are a set of tips that you can follow when you are in a stuck elevator, and these tips are as follows:

Keep calm

It is considered one of the most important pieces of advice that must be followed,
and it is considered an answer to the question of what to do if you are in a stuck elevator,
is not to feel anxious when you are in a stuck elevator,
because civil defense men will be able to repair the fault quickly, and they will be able to get the passengers out within a few minutes. You can take a series of long, deep breaths to calm your nerves,
and you will be able to feel more comfortable until the rescue operation is completed.

Look for lighting

Try to search for a source of lighting, or use the searchlight through your phone,
so that you can see the elevator buttons, and also you will be able to know the number of people who are with you inside the elevator so that you can calm down everyone who feels fear or anxiety,

and press the button to open the bumper and wait Some time until you discover if it works or not, then press the door close button and wait a few minutes as well. If the buttons do not respond, stop pressing them so as not to cause an increase in the malfunction.

Press the call button

In all elevators there is a call button or a special phone for emergencies, you can try it in order to be able to make a call so that you can draw the attention of maintenance supervisors in the place that is stuck in the elevator, and in the event that no one responds to the calls or if the phone is broken, you can knock on the door until Attract the attention of anyone who passes in front of the door so that they ask for help for you.

Contact civil defense

In order to be able to know what to do if you are in a stuck elevator,
you can contact the Civil Defense or contact the emergency police so
that they can help you quickly, because these calls are free.

Waiting for help

After making these attempts, you should wait for help to come and sit at the end of the elevator cabin, and make simple breathing movements that help you calm your nerves, and also calm those with you in the elevator because their tension will reflect on you in a negative way.

Things to avoid when in a stuck elevator

There are some tips that should be avoided when you are in a stuck elevator,
so that you can know what to do if you are in a stuck elevator, and these tips are as follows:

Avoid opening the door forcefully

If the door is slightly open, you should move away from it and do not try to open it by force,
because this will endanger you, especially in the case where the elevator may move suddenly.

Do not jump down or up in the elevator

You should avoid moving or jumping in a sudden way inside the stuck elevator. In that case,
it is preferable for everyone in the elevator to be fixed until help comes,
because jumping may lead to the elevator falling in a sudden way,
which results in an accident that results in a group of serious injuries. to the occurrence of death.

Do not try to quickly get out of the elevator

Do not try to exit quickly when help comes and opens the door, because there is a possibility
that the elevator will move suddenly, and avoid crowding on the door during the exit process, because this may endanger everyone who is in the stuck elevator in the event that the elevator suddenly falls.

How to minimize being in a stuck elevator

What to do if you are in a stuck elevator One of the important things that can help you to identify the answer to that question is to reduce the chances of being in an elevator that might get stuck,
knowing that it is difficult to predict the occurrence of a malfunction in the elevator,
but there are some tips that reduce your exposure to that Those tips are as follows:

Do not use the elevator in emergency situations, such as an earthquake in the place,
the outbreak of war, or a flood, because the chance of elevators malfunctioning in these cases is very large, as it is a source of danger in those cases and not a means of escape.
Avoid cases of crowding that occur in elevators and exceeding the specified weight
for the elevator load, as this increases the possibility of a malfunction in the elevator.

How to stay safe in a falling elevator

It is one of the things that everyone who is looking for what to do if you are in a stuck elevator should know, so that they can avoid injuries when the elevator falls, although this is one of the rare things that happen when the bumper is damaged

because the elevator is designed in a way that prevents it It can easily fall, and protect it from explosion when the fall occurs, unless the elevator is dilapidated or periodic maintenance is not carried out, in which case you should follow some tips so as not to suffer damage when it falls.

Important tips to follow when the elevator falls

Lie on your back on the floor of the elevator.
Protect your head as best you can by protecting it with your hands.
Do not try to stand with your knees bent, because this puts a lot of pressure on them
and also puts a lot of pressure on your back when the elevator falls
Don’t try to jump off before the elevator reaches the bottom.

Tips when there are people inside the stuck elevator

When a sudden breakdown occurs in the elevator and there is a group of people in it,
the maintenance company is contacted and prompt assistance is requested from them immediately,
and until they arrive, you can do the following:

When the elevator stops in front of a floor of the building, you can disconnect the main power knife, and use the emergency key to open the door, and it is often present with the building guard.
Remove the detainees inside the bumper very quietly so that no one is in danger.
Close the bumper again with the emergency switch to avoid accidents caused
by someone falling into the elevator shaft.
Do not restore electricity to the elevator until the maintenance company comes
and does the necessary work.

When exposed to any problem related to the question of what to do if you are in a stuck elevator,
you can follow the advice that must be followed in that case
and stay away from things that may expose and expose those with you to danger.

Causes of elevator malfunctions and how to deal with them

August 1, 2023

Causes of elevator malfunctions, as recently there have been large and many problems in those elevators, and this is due to poor maintenance work and irregularity well or due to passengers jostling in the elevator in addition to the consequences of overloading and other problems.

There are also many technical problems, and the increase in movement also in buildings
and urbanization, which led to a significant increase in the demand for those elevators,
which are being installed in all modern ways.

This is in addition to working to solve all the problems that are in these elevators, and many subscriptions for this maintenance were made on a monthly basis, and that was for many elevators of all shapes and sizes as well as their types, and we must also work to know the most prominent and important problems

Causes of elevator malfunctions

The elevator is a room, and that room is attached to many ropes that are powered by motors to work on raising it and then lowering it also in the channel or corridor that has been allocated to it,
and then it is the one that is in all parts of the sides.

And then the walls are also dark or transparent, which may be glass, and it is possible to see the outside through them as well, and in many huge and famous buildings also these elevators carry many alarms and centers.

Also, which is considered for remote control and all small computers, and it is through which all its movements and what is in it are recorded, as there are in many of them phones that help in the process of communication between those inside the elevator and all control centers.

It is the one that works on monitoring the elevators and then working to ensure their quality and then the absence of any problems or malfunctions, and after that care is taken for their presence
and then their availability and not being late in all important buildings in addition to all vital places.

Reasons for stopping and breaking down the elevator

There are many reasons for elevator malfunctions and then it stopped,
and they include the following:

Fuse combustion.
In addition to the power supply and then frequent interruptions.
The presence of a salon for the door is improper.
Playing with all the elevator buttons during the process of its preparation to stand for the process of moving the elevator from the speed that is slow to the fast speed directly and suddenly,
and this is what causes the overload separation.
In addition to that, there is the plastic cladding that rolls around the cab or breaks it,
and this is what causes the cab to be unbalanced.
In addition to the presence of a lot of dust that is accumulated on the control, and this is because the machine room is not closed well, especially in the event of this bad weather.

The most common signs that cause elevator malfunctions

Causes of elevator malfunctions

Where there are many signs that cause the causes of elevator malfunctions, including the following:

Worn beams problem

And it is possible that the friction of the ropes with each other while carrying the elevator leads to the erosion of these beams, which means that this appears a circle of destruction, because it may lead and cause damage to the vital spare parts of the elevator.

Power failure issue

Which may lead to a large consumption of elevators to a negative impact on the electric current
and those of the causes of elevator malfunctions.

How to deal with stuck elevator

Where there are many, many methods related to the elevator suspension process or related
to the causes of elevator malfunctions, and among those methods are the following:

Since that cabin must be stopped, and then this is by making this ceiling in the cabin equal to the ground, and then the tiles in the floor, and then the emergency key is used in the process of opening the outer door.
In addition, the roof of the cabin is stopped, and then work is done to open the emergency hatch to the top, and then start the process of removing all detainees through this hatch to the outside.
In addition to the case of increasing the speed or cutting one of the ropes, this device, which is the parachute in this elevator, will work very automatically.
And then he works to stop this ascender in its place completely, and in this case it will be difficult to move the elevator by many of the previous means to the bottom, and work must be done to move it to the top until work is done to stop it on the floor also, the causes of elevator malfunctions.

The most prominent and important causes of elevator malfunctions

Where there are many, many elevator malfunctions, in addition to the elevator failure code,
the causes of elevator malfunctions, and among these malfunctions are the following:

Working on bundles of expendable ropes

As you place those sheaves on those ropes, this in turn causes an increase in the level of corrosion on the elevator shaft, and then this creates a cycle of destruction of the two main components,
where the sheaves can be re-bundled or replaced to prevent the failure of the hoist rope premature.

All power supply process problems

Where these elevators require a large number of energy from all the systems of the facilities of those commercial buildings, so these updates can be affected on the system along with all the operations of the motors or even damage to the elevator system, and those elevators that have any history of malfunctions must also be subject to driver or operating issues to perform a power quality scan.

The most prominent signs that need maintenance intervention

Where there are many, many signs that are among the causes of elevator malfunctions
that require maintenance intervention, and among those signs are the following:

Crashes occur frequently

Whereas, if your elevator has been missing for more than 15 years,
it is subject to the occurrence of these malfunctions continuously,
and among the most famous of these malfunctions is the problem related to closing the door,
in addition to the long waiting times for passengers.

Stop in the middle of settlement

As in this problem, the elevator stops at a distance higher than the floor of the floor
or can be below it, and of course this will be considered one of the most serious elevator malfunctions,
as it is possible for passengers to stumble when they are not careful,
and in that case you may need immediate maintenance intervention.

Speed changes

Elevators are exposed daily to transfer different weights up and down, so it is likely that a sudden change in speed will occur, for example, to notice a slow speed or an increase in speed, so you must notice whether the speed of the elevator changes before it reaches the ground or does it not change,
and then I get the examination For maintenance to fix this defect causes of elevator malfunctions.

At the end of the article, we talked about the causes of elevator malfunctions,
as well as the most prominent signs of a necessary maintenance intervention.

Elevator failure code and the most important causes of its problems

July 31, 2023

Elevator failure code Since in the recent period I have found many and many problems in those elevators, and then this is due to poor and irregular maintenance or a large number of passengers jostling in the elevator along with overloads and others.

There are also many technical problems and then the increase in the movement of urbanization,
and there are many increases in the process of demand for those elevators,
which are being installed using modern methods.

This is in addition to working to solve all the problems that are in those elevators, and a lot of subscriptions have been made for that monthly maintenance for many elevators of all shapes
and sizes as well as their types.

We also have to work on knowing the most prominent
and important problems that many elevators face,
which must be solved.

Elevator failure code

As the elevator consists of a room and that room is tied with many ropes that are powered by motors to raise it and also lower it in the channel or corridor designated for it, and then it is the one that is in all sides and the walls are also dark or transparent that are glass.

It is possible to see the outside through them,
and in many huge and famous buildings also these elevators carry many alarms and centers.

And then make sure of its quality and that it does not have any problems or malfunctions,
and then care is taken for its presence and then its availability and not being late in all important buildings as well as vital places.

Major problems with elevators

Where there are many, many elevators, in addition to that, elevators have a large number of problems, including the elevator failure code, and among those reasons are the following:

Not activating the code for those elevators, which is also issued in application to the law on unified construction and then its executive regulations,
which stipulate that the elevator be like any other product where it has a specific manufacturer.
Whereas, the elevator must be issued a test certificate of its own, along with the quality of that validity for all important components, which belong to all devices and all safety means.
In addition to the case of the existence of the local elevator, as here the company for those elevators will be transferred, and it is the one who plays the role of this factory, and then it is not qualified for this.
It does not have any capabilities or sufficient know-how and technical knowledge as well,
and then this is in accordance with all the foundations and standards of design.
In addition to the fundamental and fundamental difference between the factory and local elevators.

The most important reasons for elevator breakdowns and stops

There are many reasons for elevator failure and stopping, and they include the elevator failure code,
and among these reasons are the following:

The fuse burns.
The power goes out frequently.
The presence of a salon for the door is improper.
Playing with the elevator buttons while it is preparing to stop in order for the elevator to move from the speed that is slow to the fast speed directly and suddenly, and this is what causes the overload separation.
In addition to the presence of the plastic cladding, which is damaged or broken in the cab,
this is what causes the imbalance of that cab in the elevator failure code.
In addition to the presence of a lot of dust that is accumulated on the control,
this is because the machine room is not closed well, especially in the event of this bad weather.

How to deal with a stuck elevator

Where there are many, many methods for the elevator suspension process
or for the elevator failure code, and among these methods are the following:

Since that cabin must be stopped, and then this is by making this ceiling in the cabin equal to the ground, and then the tiles in the floor, and then the emergency key is used in the process of opening the outer door.
In addition, the roof of the cabin is stopped, and then work is done to open the emergency hatch
to the top, and then start the process of removing all detainees through this hatch to the outside.
In addition to the case of increasing the speed or cutting one of the ropes,
the device for the parachute in the elevator works very automatically.
And then it works to completely stop the ascender in its place, and in this case it is difficult to move the elevator in many of the previous ways to the bottom, and it must be moved to the top until work is done to stop it on the role in the elevator failure code.

Elevator malfunctions and their most important causes

Where there are many, many faults for elevators in addition to the elevator failure code,
and among these faults are the following:

Doing used rope bundles

As you put the sheaves on those ropes, this in turn causes an increase in the level of wear on the elevator shaft, and then this creates a cycle of destruction of the two main components, where the sheaves can be re-bundled or replaced to prevent premature hoist rope failure

Power supply problems

Where these elevators require a large number of energy from all the systems of the facilities of those commercial buildings, so these updates can be affected on the system along with all the operations of the motors or even damage to the elevator system, and those elevators that have any history of malfunctions must also be subject to Motor or operation issues lead to a power quality scan in the elevator failure code.

Other elevator malfunctions and their most important causes

There are many reasons for these malfunctions, including the following:

Poor lubrication and oil

This is done by doing an analysis of the oil when this corrosion occurs,
and then the small metal particles that are present in the oil are released
and then these can interfere with the proper functioning of the system of this elevator.

Bearing malfunction

Elevator failure code

Whereas, the presence of a ball bearing malfunction causes more than half of all motor malfunctions in the motor, and most of the time these noisy bearings are attributed to all the vibrations inside the motor in the elevator failure code, although the motors help in the change process as they
also help in The process of reducing your power usage however works to advance the overall current.

At the end of the article, we talked about the elevator failure code, the most important problems
that cause this malfunction, and how to deal with them, along with the most important causes.

What to do if you are in a stuck elevator

Things to follow when the elevator gets stuck

Keep calm

Look for lighting

Press the call button

Contact civil defense

Waiting for help

Things to avoid when in a stuck elevator

Avoid opening the door forcefully

Do not jump down or up in the elevator

Do not try to quickly get out of the elevator

How to minimize being in a stuck elevator

How to stay safe in a falling elevator

Important tips to follow when the elevator falls

Tips when there are people inside the stuck elevator

Causes of elevator malfunctions

Reasons for stopping and breaking down the elevator

The most common signs that cause elevator malfunctions

Worn beams problem

Power failure issue

How to deal with stuck elevator

The most prominent and important causes of elevator malfunctions

Working on bundles of expendable ropes

All power supply process problems

The most prominent signs that need maintenance intervention

Crashes occur frequently

Stop in the middle of settlement

Speed ​​changes

Elevator failure code

Major problems with elevators

The most important reasons for elevator breakdowns and stops

How to deal with a stuck elevator

Elevator malfunctions and their most important causes

Doing used rope bundles

Power supply problems

Other elevator malfunctions and their most important causes

Poor lubrication and oil

Bearing malfunction

Speed changes